Stainless steel SS304 has beautiful appearance and good performance.
The subcooling degree of the Thermostatic (film box) trap is 15℃to remove the condensed water below the saturation temperature, and the energy saving is effective.
Effectively prevent pipeline impurities from entering the valve to ensure the proper operation of the trap.
All internal parts are made of stainless steel SS304, suitable for food, medicine and other industries.
Film box traps are widely used in heat tracing pipelines and equipment with small displacement and low temperature require-ments due to their small size, large subcooling degree, good energy saving effect and low temperature resistance.
The technical advantages of VMV traps are unique and reasonable structure and high-precision internal parts.
•GB/T12250-2005 Steam Trap Terminology Marking Structure Length
•GB/T22654-2008 Technical Conditions for Steam Traps
•GB/T12251-2005 Test Method for Steam Traps
•ISO 6948 Automatic steam traps
Production and performance characteristic tests
VMV Film box trap body and bonnet are made of 304, which can be used in the clean environment, such as medical, health, food and other industries. The Film box is made of stainless steel, and the condensate discharge temperature is subcooled at 15- 20°C.
The Film box trap adopts linear sealing closing system, which has no noise, good air exhausting capacity, fully utilizes the sensible heat of condensed water, and has good energy saving effect.
Film box traps work on the difference in temperature between steam and condensate. When the steam in the pipe releases heat and the temperature decreases to produce condensate, the diaphragm in the diaphragm box shrinks and moves to open the valve seat to discharge condensate. The Film box trap can be used as a vent valve.
Film box trap drains intermittently. The normal product SKT16 discharges subcooling at 15-20°C. If there is a subcooling requirement, please specify it when ordering. The back pressure rate of the Film box trap can reach 50% (rear end pipe pressure/steam pressure), which is not suitable for closed recovery system, but suitable for pipeline and heat tracing system to remove condensate. In general, the safety factor is 2-3 times.
Special reminder: The amount of condensed water and the differential pressure of the steam-using equipment are important indicators for the selection. The same type of steam trap will increase the displacement with the increase of the differential pressure. See the details on displacement curve.
VMV Film box traps can be installed at any position on pipelines or equipment. The basic configuration of the traps is shown in the figure above.
Zhejiang Newton Fluid Control Co.,Ltd.
What can we do for you?
1. 26 years of brand history and industry experience.
2. Complete certificates, first-class standard.
3. Stable and high level product quality.
4. Regular products, delivery within 7 days.
5. Price support, adapt to the local market.
6. Team of 37 engineers, reliable technical support.
7. Professional training, online and offline form.
8. VR live display, not limited by geography.
9. Sale and service, 12 hours quick response.
etc…
